The current situation of tube mold industry in China:

According to the statistics of "basic situation of national mold professional factory" compiled by the operation and Management Committee of China mold industry association, China's mold grows at an average rate of more than 15%, more than twice the average increase in GDP. Among them, the casting mold accounts for about 5% of the total output value of all kinds of molds, with an annual growth rate of 25%, and the development is very active.

The development of China's mold industry gives strong support to the manufacturing industry. At the same time, the development of manufacturing industry also promotes the development of mold industry. China has also become a big mould production country. The number of mould manufacturers in China has increased to more than 20000, with about one million employees. The annual output value of mould has reached 55 billion yuan. However, China's mold and machine tool industry is still "big but not strong". At present, China's mold industry is known as a "manufacturing power" in the world with a huge annual import and export volume, but due to the constraints of technical personnel and other factors, they are relatively concentrated in the low-end field, so the high-end market for domestic mold enterprises, the economic temptation is undoubtedly huge.

Industry Association is an economic organization established by related enterprises for their own development. Under the condition of market economy, as an important intermediate organization, trade association has the function of coordinating the interests of market subjects and improving the efficiency of market allocation. Therefore, to promote the construction of industry associations has become a subject that can not be ignored. In order to make great progress in mould industry, it is necessary to promote the construction of Mould Industry Association.

The proportion of some high-level molds has reached about 40%. These molds are characterized by complexity, precision, large scale and long life. For example, some molds can reach a single set weight of 125t? Some precision multi position progressive dies have a service life of 300 million punches and a precision of 0.001M m. With the increasing precision requirements of the mold parts industry and the progress of science and technology, the processing accuracy of some parts will be within 1 μ M. The innovation and R & D ability of enterprises have been improved, and new technologies and processes have been widely promoted. For example, the self-processing technology of mould and the flexible and integrated technology of mould? Research and development of die structure design system, large-scale progressive die, advanced die manufacturing technology and 3D design technology? Stamping process design system, reverse engineering and body die digital manufacturing system are all inseparable from the development and promotion of digital and information technology.

Rubber mold design

Mold production is growing:

According to statistics, in the first half of 2013, the mold output of Hubei Province was 16388 sets, with an increase rate of 3.43%; among them, 4181 sets were produced in June, with an increase rate of 78.6% in June. From January to June 2013, Guangxi mold output was 34344 sets, with an increase rate of 6.09% from January to June 2013. In the first half of 2013, Chongqing's mold output was 7365 sets, with an increase rate of 1.43%. In the first half of 2013, Sichuan's mold output was 921682 sets, with an increase rate of 660.94% from January to June.

Problems:

China's mold industry is developing, but there are many problems to be solved. China's mold industry has been busy with expansion, thus ignoring Market Research and understanding of customer demand, resulting in high-end mold becoming the short board of China's mold industry. Most of the high-end mold required by China's market depends on imports, while there are a large number of mold products out of the warehouse without doors and large amount of extrusion, resulting in a serious supply and demand dislocation situation.